> Tell a friend
This site matches your expectations, send a note to a friend about it.
|
> Previous contributions to the AboutSpice.com mailing-list
| Submitted by:
webmaster on
2004-12-15 22:10:47 . |
| Topic: |
Re: Spice Models |
| Body: |
Try removing the .ENDS statements. These statements are only to be used to terminate a subcircuit description (.SUBCKT).
Carl |
| Reply
to this contribution
| Write
to the contributor
|
| Submitted by:
vincectec on
2004-12-15 21:51:20 . |
| Topic: |
Spice Models |
| Body: |
I am having a problem with a Spice simulation using TP2104 and TN2106 FETs, and using the spice models provided by Supertex. I ran the simulation with generic FETs as supplied by Multisim and it worked reasonably well (no error message).
The followinmg are the spice models for the FETs:
********************************************
*
*TN2106 MODEL
*
.MODEL TN2106 NMOS (LEVEL=3 RS=0.0205 NSUB=1.0E15
+DELTA=0.1 KAPPA=0.0506 TPG=1 CGDO=6.1716E-10
+RD=0.12 VTO=1.200 VMAX=1.0E7 ETA=0.0223089
+NFS=6.6E10 TOX=0.80E-7 LD=1.698E-9 UO=862.425
+XJ=6.4666E-7 THETA=1.0E-5 CGSO=9.10E-9 L=2.5E-6
+W=0.5E-2)
.ENDS
*
*
*TP2104 MODEL
*
.MODEL TP2104 PMOS (LEVEL=3 RS=0.73 NSUB=5.0E14
+DELTA=0.1 KAPPA=0.0411 TPG=-1 CGDO=6.1716E-10
+RD=1.91 VTO=-2.10 VMAX=3.0E6 ETA=0.12098
+NFS=3.384E11 TOX=1.0E-7 LD=1.6980E-9 UO=865.45
+XJ=6.5E-7 THETA=4.063E-5 CGSO=9.10E-9 L=2.5E-6
+W=0.5E-2)
.ENDS
************************************
This is the error message:
Error: PARAM: There is .ends statement without .subckt.
Error: PARAM: There is .ends statement without .subckt.
Error: misplaced .ends line: .ends
**********************************
The pins are ordered D,G,S (1,2,3).
Hope you can help. |
| Reply
to this contribution
| Write
to the contributor
|
Post a new contribution | Back to the list of topics
|
|
Copyright © 2001-2010
CIW.
All rights reserved. For any comment, update or feedback, please
use the contact us form. All registered
and unregistered trademarks referenced herein are the property of
their respective owners and no trademark rights to the same is claimed.
Read our privacy
statement.
The material on this web site is provided "as-is" without
warranty of any kind, expressed or implied, including without limitation
any warranty concerning the accuracy, adequacy, or completeness
of the material or the results obtained using same. CIW will not
be responsible for any claims attributed to errors, omissions, or
other inaccuracies in the material presented on this web site. In
no event shall CIW be liable for direct, indirect, special, incidental,
or consequential damages of any nature in connection with, or arising
out of, any use or application of the materials herein.
Links: KoffeeWare
- photo
backup - Send
photos - Send
pictures - URL shortener
|
